I have tried everything to get the rod that holds the swingarm to the frame out, i dont know what else to do.
Does anyone have any tips or anything to help me get it out?
every time i take mine out i just take a punch and a hammer and it comes out pretty easy. if it doesnt come out that way just try to move the swing arm around and try it in different positions. hope it helps.
soak it in penetrating oil and let it sit for 20 minutes then use an air hammer to rattel it loose. just be really carefull. or get a hold of the end of the bolt with a pair of vice grips then twist and pull it should come out.
same thing happened to my RM, u just have to be very persistant with it, turns out the pin was all rusted and shit. Keep putting penitrating oil and WD40 on it and just smash on it with a rod and hammer. Try getting someone to lify up on the rear tire while you do it as a well.
every time
every time i take mine out i just take a punch and a hammer and it comes out pretty easy. if it doesnt come out that way just try to move the swing arm around and try it in different positions. hope it helps.
i'v been doing that but my bi
i'v been doing that but my bike is a 1993 i dont think it has ever been off so its on there pretty good.
umm
soak it in penetrating oil and let it sit for 20 minutes then use an air hammer to rattel it loose. just be really carefull. or get a hold of the end of the bolt with a pair of vice grips then twist and pull it should come out.
same thing happened to my RM,
same thing happened to my RM, u just have to be very persistant with it, turns out the pin was all rusted and shit. Keep putting penitrating oil and WD40 on it and just smash on it with a rod and hammer. Try getting someone to lify up on the rear tire while you do it as a well.