i am looking to upgrade my crf 250r and don't really know whether i should pipe it with an a ir filter or bore it out of or what. I need some info on how to get more bottom end power
pipe,jet kit,air filter(uni filters are cheap and have good flow),change the gearing. you'll get more bottom end but lose a bit on top,depending on where and what type of riding you do i do alot of wide open riding so i knoked off a couple teeth for that extra top speed. expirement with differnet size sprockets and see whitch gives you the best feel. thats all i do . getting into the motor can get exspensive fast.at least this way you can unlock some potential at a low cost
good luck
pipe,jet kit,air filter(uni f
pipe,jet kit,air filter(uni filters are cheap and have good flow),change the gearing. you'll get more bottom end but lose a bit on top,depending on where and what type of riding you do i do alot of wide open riding so i knoked off a couple teeth for that extra top speed. expirement with differnet size sprockets and see whitch gives you the best feel. thats all i do . getting into the motor can get exspensive fast.at least this way you can unlock some potential at a low cost
good luck
Get a bigger bike
I had a wr250f and wanted more power.
Put in a YZ cam, Staintune exhaust, went well, but it still wasn't enough.
I decided to get a bigger bike next so that I didn't need any mods.