Can any 1 help me??? i am looking to fit lights on my (old) CR 250 rk 89-90.... i need to fit as it,s part of a requirement to get it rec registered....
any brand will do.....
I think this could solve my problem... many thanx . i have tried to source these items with no real luck in Australia... look out motor reg here i come..
Sorry, I don’t have any. You might be able to look up a Honda that sells with a light or other bikes that come with a light, to get a idea of what is needed for wiring a light up. This site seemed to have some info on what parts to collect ( http://4strokes.com/tech/honda/lightup/ ) and why they are needed. A tech section from 4strokes.com ( http://4strokes.com/tech/ )
This is a tech tip about stators ( http://www.crustyquinns.com/tech/stator.html )
What type of bike are you planning on wiring for lights?
I live in California, and am currently researching putting a light kit on a 05 RM-Z450. Chances are I will have to trial and error everything since it’s a new model. Once I get more time and closer to a working solution I’ll post my findings of what wiring, kits, and adaptations that worked for me.
i really to appreciate the help and direction u have given...i have been busy (work) hence the slow responce... my wife has found other things for me to do other than spending time on the net or in the garage... hehe
lights???
I would be very interested as welll
Some google searches to help
A few choices to look at:
http://www.acerbis.com/p107_headlight/p107.html
A company that does lighting coils which you will most likely need:
http://www.procycle.us/main/lightcoils.htm
CR125 90-96, CR250 89-92 80 Watts $186.95
Other things you might need:
http://www.procycle.us/main/dskit.htm
Good luck.
I live in CA. USA and its all but impossible to street legal a dirt bike any more.
EDM182
many thanks
I think this could solve my problem... many thanx . i have tried to source these items with no real luck in Australia... look out motor reg here i come..
Not a problem, one more place to try...
I also ran across this site, which may help you as well.
http://www.dirtbikemagazine.com/archives.asp?var=read&id=48
The article says it wont work for a '99 & '00 Honda.
Here is the companies catalog page
http://steahlyoffroad.com/catalog/lighting.shtml
EDM182
Lights
A wiring diagram would help, Which state are you from?
Cheers!
Felix
Wiring Diagram
Sorry, I don’t have any. You might be able to look up a Honda that sells with a light or other bikes that come with a light, to get a idea of what is needed for wiring a light up. This site seemed to have some info on what parts to collect ( http://4strokes.com/tech/honda/lightup/ ) and why they are needed. A tech section from 4strokes.com ( http://4strokes.com/tech/ )
This is a tech tip about stators ( http://www.crustyquinns.com/tech/stator.html )
What type of bike are you planning on wiring for lights?
I live in California, and am currently researching putting a light kit on a 05 RM-Z450. Chances are I will have to trial and error everything since it’s a new model. Once I get more time and closer to a working solution I’ll post my findings of what wiring, kits, and adaptations that worked for me.
EDM182
Wiring Diagram
Just found this at Baja Designs:
http://www.bajadesigns.com/2005%20Web%20Site/wiringinstructions.htm Look under the Misc. section.
EDM182
Sorry
Sorry EDM182 I was directing that comment to "thejet" but you have found that wireing diagram for him anyway. Good on ya!
Felix
thanx once again
i really to appreciate the help and direction u have given...i have been busy (work) hence the slow responce... my wife has found other things for me to do other than spending time on the net or in the garage... hehe
home
home is Australia Victoria Melbourne....