Hi
i want bikein yesturday on my crf230 and the chain came off and bent up inbetween the swing arm and the front sproket really bad!!!
NOW MY PROBLEM:( i cant get the god dame thing out it is so tight!
is there any way that i can get the thing out without cuting it off.
THANKS
there is no master link by th
there is no master link by the way!
o dam well i have a crf 230 a
o dam well i have a crf 230 and nothing like this had happened so i dont no srry.
That happend to me lucky it h
That happend to me lucky it happend when i was in my yard. As far as i can remember i took off the front sprocket and pulled it and the chain was wraped around the sprocket.
easy
just like mxdave said take the sproket off. the chain should come undone. but if is bad as you say it is then get a new chain b/c the one you have is probably bent in some way. and if you use it, it will just keep coming off trust me.
yea and the cut the other one
yea and the cut the other one off.
get a new chain
cut the old one off with a dremel- or grinder if it is as bad as you say its probably trashed
wash the bike throughly !! check for cracks in the cases
a new chain cheep is ? 20 dollars
you will be happier the new one willnot be worne or bent / twiseted
adjust the wheel - check the sprockets to see if they are bent
that happened to my yz 125 in
that happened to my yz 125 in the middle of nowhere and i pushed it to this guys house and we undid the sproket and pried it with a screw driver till the sproket came off then it was simple after that
ya so i just take the sproket
ya so i just take the sproket off with like a crow bar and it should be free cuz i undid the bults and tryed to pull it off but i couldent move it i dident no if i should pry it with anything to u think it would be ok if i took acrow bar and pryed it off with that ???????